T-Model™ Spray Gun

Fuji Spray® developed the T-Model™ spray gun (US patent) to meet the rising demand for a spray gun that offers ultimate flexibility and control.

The T-Model™ uses Canadian technology to deliver an enhanced spray pattern for exceptional performance. The new sleek design is ergonomic and well balanced. Overall, the T-Model™ is 20% lighter which allows for easy maneuvering and less fatigue on the operator. The Fuji Spray® T-Model™ spray gun also features an exclusive side-mounted Fan Pattern Control™ to adjust the size of the fan. This control allows you to switch from circle to wide pattern or anywhere in between. Simply turn the knob counter-clockwise for a smaller pattern and clockwise for larger. This method provides full incremental adjustment of the fan size.

All Fuji Spray® T-Model™ spray guns are non-bleed. This means that air passes through the spray gun only when the trigger is pulled. Benefits of non-bleed include less turbulence in the spray area, less paint buildup on the tip of the fluid nozzle, and far less spray gun noise. All newer Fuji Spray® turbines are designed and built with a bleed-off inside the turbine to allow the use of any non-bleed spray gun.

The Fuji Spray® T-Model™ with all these exceptional components is a leader in the market. You will achieve that flawless performance & remarkable outcome every time you use it. It’s an excellent choice for professional use or for the serious hobbyist. In fact, our friends at This Old Woodshop loved it too – check out what they had to say about it right here.

Additional Key Features of 5070 T70 Spray Gun and 5175G T75G Gravity Spray Gun

  • 1.3mm Aircap Set installed.
  • Rear rotating nipple for pressure tubes – makes for easier adjustment especially for those who are left handed.
  • Stay-cool nylon handle (fitted over a metal tube)
  • Metal fluid knob and collar
  • Less blowing around of shop dust and negligible turbulence in the spray area.

 

#5070 T70™ Spray Gun

T70 spray gun as supplied with all Fuji Systems

This non-bleed HVLP T-Model™ spray gun features the following in addition to the key features listed above:

  • 1 Qt. bottom feed cup

The Fuji T-Model™ with all these exceptional components is a leader in the market.  You will achieve that flawless performance & remarkable outcome every time you use it.

#5175G T75G™ Gravity Spray Gun w/ Nylon Gravity Cup

Now installed with a 600cc nylon gravity cup and lid. The lid on this nylon cup provides a perfect seal with no gasket required.

This non-bleed HVLP T-Model™ spray gun features the following in addition to the key features listed above:

  • Center mounted 600cc nylon gravity cup
  • 3 Additional gravity cups available

The Fuji T-Model™ with all these exceptional components is a leader in the market.  You will achieve that flawless performance & remarkable outcome every time you use it.

9600-G-XPC™ Gravity Spray Gun

By popular demand, we have re-launched the G-XPC™ gravity spray gun!

This model features the side-mounted 400cc gravity cup and the tilt feature, which easily allows the operator to spray in any direction including upwards. The angle of the gravity cup 400cc (.85 Pint) can be adjusted. This cup is now pressurized so you have the full range of spraying available to you. This G-XPC™ gravity spray gun also features an exclusive side mounted Fan Pattern Control™ to adjust the fan size and comes installed with a 1.4mm aircap, which is best for fine finishing with lacquers, enamels, polyurethanes, latex, water-based coatings and more. The G-XPC™ is especially popular with bathtub refinishers and perfect for cabinets/furniture and automotive.

The G-XPC™ gravity spray gun is non-bleed. This means that air passes through the spray gun only when the trigger is pulled. The benefits of non-bleed include less turbulence in the spray area, less paint buildup on the tip of the fluid nozzle, and far less spray gun noise. All newer Fuji Spray® Turbines are designed and built with a bleed-off inside the turbine to allow the use of any non-bleed spray gun. 9600-G-XPC™ spray gun optional cups are available in 3oz, 400cc, and 600cc (Nylon).

7001 M-Model™ Spray Gun

The 7001 M-Model™ is the spray gun of choice offered with all of our Semi-PRO™ 2 stage systems. This spray gun, with the 1 Qt. bottom feed cup is perfect for any weekender or hobby enthusiast and it gets the job done. It features a non-bleed gun with rear pattern control and aircap set #3 (1.3mm) is installed.

NOTE:  The parts for this spray gun are not compatible with other Fuji Spray® guns.

7002G M-Model™ Gravity Spray Gun

The 7002G M-Model™ gravity spray gun is the gravity version of the 7001 M-Model™ and is offered with all of our Semi-PRO™ 2 gravity systems. It’s designed for the weekender or hobby enthusiast, and allows the operator to easily get into tight spots. The 7002G features a non-bleed gun with a rear pattern control. It also has a 400cc aluminum gravity cup, is side mounted with a U-Tube, and an aircap set #3 (1.3mm) is installed.

NOTE:  The parts for this spray gun are not compatible with other Fuji Spray® guns.

 

9622 Touch-Up Turbine Bleeder Spray Gun

9622 Touch up spray gun for web

Our Touch-Up turbine spray gun can be used with any HVLP Turbine.  Just attach with the quick connect coupler on your hose and begin spraying! It’s assembled with an 8oz mini cup, and its spray pattern can be adjusted from round ¼” to 6” spray pattern. The Touch-Up turbine spray gun is installed with a 1.0 mm stainless steel needle, nozzle, and aluminum air cap, and an additional size 1.8 mm air cap set is available as an accessory.

This item is really handy for projects that require smaller touch-up work. It’s ideal for hard to reach places, especially when your standard gun is too large. It’s that easy – a simple, affordable option that’s a paint saver! A perfect addition to your Fuji Spray® HVLP System.

Please Note: This will fit most other turbine systems, but will not work with an air compressor.