THE FUJI SYSTEMS

The Mini-Mite 3X™ Model - NEW!

Fuji recognized that although there were plenty of lower priced HVLP turbine systems on the market today, there were none that combined top quality with all the features demanded by professionals. Features such as a powerful 3-stage Turbine Motor, Metal Turbine Case and Non-Bleed Spraygun with Stainless Steel Components. Plus extra features such as Air Control Valve, High-Efficiency Aircap for even less overspray.

It is often thought that the reason that most people purchase an HVLP system is for speed but we have found that the main reason is really the desire for a high quality of finish. Of course, any spray system is a few times faster than brushing - admittedly, even a cheap version will give you speed. But for quality of finish, you do need power (3-stage minimum) and a high quality spraygun with all the features. Please read the information on our Components Page where these features are described. This will give you the knowledge you need to make an educated decision.

The Mini-Mite 3X™ system replaces the Fuji Super Pro model which was a real favorite with cabinet makers and professionals for well almost 2 decades. Fuji installs the same powerful 3-stage Ametek-Lamb Electric turbine motor as used in the Super Model. The Mini-Mite 3X™ (MM3X) is a professional system with a standard 3-stage turbine. By 'standard' we mean that the turbine does not have the patented noise-reduction feature as seen on the Fuji Q-Series. However the noise level is no more than any other standard HVLP turbine. The MM3X Turbine develops approximately 6psi. This is more than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings.

The MM3X system is equipped with the XT-2 Spraygun with 1qt (1000cc) cup. This spraygun can be easily converted to a gravity feed cup using the Fuji B2G Conversion Kit. The conversion takes only a few minutes. This conversion feature gives flexibility to anyone not sure if they would prefer a gravity gun or bottom-feed spraygun.

Note* If you have an older Fuji spraygun and wish to know if it is convertible or not, please CLICK HERE (or visit the FAQ Page).

Spray cabinets, furniture, autos or pianos - in fact, anything wood or metal. A powerful, portable system for all fine-finishing.

The Mini-Mite 4™ Model - NEW!

The MM4 system uses the most powerful 4-stage turbine on the market (same as the Q4 PRO). This system is recommended for those who want the extra power available. As with the MM3, there is no noise reduction feature, so this should be taken into account if noise level is a factor.

The MM4 is equipped with the new standard XT-2 Spraygun utilizing a 1qt (1000cc) pressure-feed cup. However, the Fuji Conversion Kit B-2G is available for conversion to a Gravity Spraygun.

What's included with every Fuji Mini-Mite™ System?

The Turbine, Spraygun with Cup, 25ft Hose with Quick-Connect, Air Control Valve, User Manual, Viscosity Cup, Wrench, Cleaning Brush. In other words... everything except the paint.

Mini-Mite™ SPECIFICATIONS

Model	Mini-Mite™ 3X	Mini-Mite™ 4
Spraygun	XT-2 Model
Aircap Set	.055" (1.4mm)
Fluid Components	Stainless Steel
Cup Capacity	1 Quart (1000cc)
Cup Type	Quick Thread	Quick Release
Hi-Flex™ Hose	25ft (7.6m)
Motor Type	3-Stage	4-Stage
Motor Model 120v	Ametek 116765	Ametek 119292
Motor Model 220-240v	Ametek 117123	Ametek 117246
Air Filters (2)	Washable
Turbine Dimensions	11" x 8.6" x 8.1"
Metric Dimensions	28cm x 22cm x 20.5cm
System Weight	26.5lbs (12kg)	27.5lbs (12.5kg)
Warranty	24 Months - Parts & Labor

The Q3 PRO™ Model - QUIET!

The Q3 PRO™ system is identical to the Super Model with the added feature of noise-reduction. The Fuji noise reduction method is patented in the USA. Research & Development was conducted by engineering staff at Carleton University in Canada under a partial Government grant program. Noise is reduced by over 50% making this the quietest 3-stage turbine available today. The Q3 PRO™ 3-stage turbine develops approximately 6psi. This system is ideal for Cabinet Makers and Furniture Refinishers. Perfect for any type of fine-finishing. The XT-2 Spraygun is convertible to gravity feed with the accessory kit B2G.

At 15ft the Q3 PRO Turbine is only 62 dba, at 20ft is it 5 dba. Normal Conversation is 60 dba .

The Q4 PRO™ Model - QUIET!

For Paint Contractors spraying Latex House Paints most of the time and for those persons who simply want the best, Fuji introduced a more powerful, 4-stage HVLP Turbine System. The Q4 PRO™ 4-stage turbine develops approximately 20% more psi than the 3-stage, allowing for less thinning of paints. Fuji installs the exact same 4-stage Ametek-Lamb Electric turbine motor used by all other HVLP makers. The Q4 PRO™ Turbine is perfect for fine-finishing of cabinets, furniture, automobiles as well as heavy-duty painting projects. The XT-2 Spraygun is convertible to gravity feed with the accessory kit B2G.

At 15ft the Q4 PRO Turbine is only 61 dba, at 20ft it is 58 dba. Normal Conversation is 60 dba.

What's included with every Fuji Q-Series PRO™ System?

The Turbine, Spraygun with Cup, 25ft Hose with Quick-Connect, Air Control Valve, User Manual, Viscosity Cup, Wrench, Cleaning Brush. In other words... everything except the paint.

Please go to The Components Page to see more details about what goes into each system.

Q-Series™ SPECIFICATIONS

Model	Q3 PRO™	Q4 PRO™
Spraygun	XT-2 Model
Aircap Set	.055" (1.4mm)
Fluid Components	Stainless Steel
Cup Capacity	1 Quart (1000cc)
Cup Type	Quick Release
Hi-Flex™ Hose	25ft (7.6m)
Motor Type	3-Stage	4-Stage
Motor Model 120v	Ametek 116765	Ametek 119292
Motor Model 220-240v	Ametek 117123	Ametek 117246
Air Filter - Dual Purpose	Washable
Turbine Dimensions	14.5" x 11.5" x 9"
Metric Dimensions	36cm x 29cm x 23cm
System Weight	39lbs (18kg)	40lbs (18kg)
Warranty	24 Months - Parts & Labor