5 Steps To A Killer Finish: Part 2

In this second of my two-part blog on producing quality finishes, I’ll cover the following: Environment set for success (continued from previous blog) Technique dialed in Learn and Apply Lessons Let’s get at it! Editor’s Note: if you haven’t yet read part 1, you may...

5 Steps To A Killer Finish: Part 1

In this two-part blog, I will share my 5 interdependent steps required to consistently produce quality finishes. Why not jam it all into one article, you ask? I wish I could, however, there is far too much material to cover on one blog. So, in this blog I will cover...

Booth on a Budget

Booth on a Budget!! A spray booth is a luxury most woodworkers want – whether their shop is home-based or located in an out-building. It provides the best environment for applying a “killer” finish but most people find them too expensive to buy. If you are using...

Spray Finishing Cart

Picture this…a versatile cart with storage unit that can also house and protect your Fuji Spray System. Sounds GREAT…Right?  Definitely something ideal for any shop but where could you get one? Why not make one? Marty Schlosser Kingston, Ontario did not only do that,...

Must Haves

Finishing Thoughts by Michael Dresdner (Woodworker’s Journal) Starting a new product…What are your “Must Haves”? Before starting on any new project big or small create a list of what you need and then make sure that you have all your “must haves” on...